Ceramic conveyor scraper UES 1650-2000


Al2o3 (%) – minimum 92%

Hardness (Mohs) – 9

Moisture absorption (%) – maximum 0.02

Fracture toughness (mpa) – 3.65

Bending strength (mpa) – 255

Density (g/cm3) – minimum 3.6

Compressive strength(mpa) – minimum 850

Thermal conductivity (W/m.K) – 16.8

We offer for sale Ceramic Conveyor Scraper UES – CSR

The advantage of these scrapers is durability and low price!

The base material of the scrapers is technical ceramic with alumina, which is characterized by very high wear resistance, strength and resistance to high temperatures.

The use of such scrapers can significantly improve the quality of conveyor belt cleaning and provides:

  • resistance to most environmental influences;
  • easy to choose the right size;
  • ease of installation;
  • the longest service life among similar solutions;
  • minimal impact on the conveyor belt.

We guarantee that:

  1. Performance tested for abrasive, sticky and corrosive solids at a constant temperature of 200ºC (400ºF).
  2. Ultimate reliability. Superiority of polyurethane scrapers by more than 4 times.
  3. No damage to the conveyor, unlike experience with sharp tungsten carbide scraper blades.
  4. Virtually maintenance-free with self-adjusting spring tensioner. Install and forget.
  5. Comes fully assembled and ready for easy installation.
  6. First installation is supervised by staff training, then follow our installation instructions.

Ceramic scraper provides excellent cleaning of the conveyor belt and does not have a destructive effect on the working surface, as well as ensure the smooth operation of the conveyor.

Standard scraper size up to 2000mm.

Another size can also be made to your order.

Have questions? Get detailed advice!

Our specialists will promptly answer any questions about the terms and conditions of delivery or work.

    10-b, Serednya st., Odesa, Ukraine

    +38 067 484 49 31